5G SENS TRACK - Changelog

v1.10.0-TRACK-X-6.0.0

Release date: 22.07.2024

Added a new functionality to track the start and stop position of a continuous movement only
Added reporting of errors that were encountered during over the air update operations
Added support for up to eight GPIOs**
Added basic support for communication with Modbus devices**
Added a configuration option that enables users to attach a customer-specific identifier to a device
Unified the sensor naming convention that is used when the device communicates with Cumulocity IoT

Fixes and optimizations

Decreased the number of mobile network attaches that are required for communication
Fixed an issue with the daylight saving time mechanism that resulted in additional messages
Fixed an erroneous behaviour that occurred when the sum of parameters pstart and pdur exceeded 24 hours

_{** This feature is only available with the Exelonix I/O Box}

Release date: 06.03.2024

Users can now mark certain message events as alerts via configuration options to distinguish them from regular messages. The device puts in extra effort to ensure that alert messages are successfully delivered, especially in challenging connectivity conditions. This involves strategies like conducting multiple retries or switching to different radio access technologies to improve the chances of message delivery.
The device now supports additional Cumulocity IoT device management functionality to update these device assets:
- Firmware
- Configuration files
- Wireless BLE stack
- Modem firmware
- Application parameters
Added configuration options to enable improved GNSS accuracy
Added configuration options to customize intervals for device management communication
Support OTA update artefacts from multiple tenant repositories of the Exelonix backend platform
Improved device boot-up time

Purge malformed telemetry data from the device storage if the backend service rejected it
Fixed handling of float values that led to failed parameter updates
Prevent low pxtime setting from blocking requests that are necessary for device management
Fixed erroneous LED feedback in some cases during device initialization
Fixed battery thresholds to provide a more accurate battery status LED feedback

Release date: 16.08.2023

Release date: 07.07.2023

Fixed

Disabling a device in Cumulocity caused the deletion of the device credentials
Failed Cumulocity communication attempts are now retried. The number of retries is configurable, and the default value is 3.
Cumulocity measurements with no reading are no longer transmitted with the value -999
Minor fixes and improvements

Release date: 26.10.2022

Fixes an issue that prevents the creation of Cumulocity/Cloud-of-Things SmartRest templates

Release date: 01.10.2022

Add Cumulocity/Cloud-of-Things platform as a possible target for telemetry data
Add functionality to conduct Firmware-Over-The-Air (FOTA) updates via the Cumulocity/Cloud-of-Things platform
Automatically adapt to the German daylight saving time offset
Add support for multiple APNs of different mobile network operators
Store measurements on the flash memory and retry sending if the initial sending failed

Release date: 01.07.2022

Initial release