5G SENS Data Sheet

Owned by Uwe Sommerlatt
Last updated: 17 Apr, 2024
2 min read

Assembly variant

a

d

j

f

k

Assembly variant

a

d

j

f

k

Connectivity

  • 3GPP Release 14 LTE Cat NB2
    Bands: B3/B8/B20 (max. 21 dBm)

  • 3GPP Release 13 LTE Cat M1
    Bands: B3/B8/B20 (max. 21 dBm)

  • EGPRS
    Bands: 900 (max. 27.5 dBm)/1800MHz (max. 23.5 dBm)

Network Metrics

  • Reference Signal Received Quality (RSRQ) (on request)

  • Received Signal Strength Indicator (RSSI) (on request)

  • Reference Signal Received Power (RSRP) (on request)

  • Public Land Mobile Network (PLMN) (on request)

  • Radio Access Technology (RAT) (on request)

Location Services

  • GNSS: (GPS + Galileo) or (GPS + GLONASS)

  • QuecLocator (Positioning via cellular base stations)

Local Connectivity

  • Bluetooth Low Energy

Modem Chipset

  • Qualcomm MDM9205

SIM

  • 3FF (Micro SIM)

Sensors

  • Real-Time Clock: max. 20ppm at 25 °C

  • Temperature: -10 °C — 70 °C ± 1 °C

  • Humidity: 5% — 95% RH ± 5% (long settling times for larger change)

  • 3-axis accelerometer

 

—

—

  • 6-axis accelerometer

—

  • 6-axis accelerometer

 

  • Barometer:
    260 to 1260 hPa ± 1hPa

  • Internal light sensor:
    approx. 0,2 Lux and above

—

  • Barometer: 260 to 1260 hPa ± 1hPa

  • Internal light sensor: approx. 0,2 Lux and above

External Interfaces

  • 4 I/O Ports

—

  • 4 I/O Ports

Data transfer protocols

  • HTTPS

Data storage and processing

  • Messages that cannot be sent immediately are stored temporarily on the device. The reserved storage space is 25 kB, which is sufficient for approximately twenty messages.

  • The device can collect a maximum of 10 consecutive messages in memory before they need to be to sent or flushed to flash memory. Additional messages are discarded if the memory space is exhausted and the device has not finished sending or flushing the messages that are already in memory.

Security Features

  • Protected Device Memory

  • Secure communication via transport level security (TLS)

  • Device authentication via ECDSA signatures

Indicator / Buttons

 

  • 3 multicolour LEDs (one for charging detection)

  • 2 Buttons

Electrical data

  • Power Supply via USB-C

  • USB-C Specification

    • Voltage : 5V

    • Current: 3A

Battery options

  • Rechargeable LiPo battery (3.7V, 2.750 mAh)

    • 300 recharging cycles

    • The device can collect 2000 data points per battery charge in typical scenarios.

  • 3 AA batteries ENERGIZER L91

    • Enables the device to operate in more extreme temperature conditions than the LiPo variant. See “Working and Storage Conditions”.

    • The device can collect 2600 data points with one set of batteries in typical scenarios.

 

The exact number of data points per battery charge heavily depends on the device as well as environmental parameters such as measurement frequency of different sensors and GNSS, connectivity, temperature, etc.

Housing

  • Ingress protection rating: IP40

 

  • Dimension

    • 90×58×25 mm

  • Weight

    • 120g

  • Dimension

    • 90×58×33 mm

  • Weight

    • 130g

Certifications / Declarations

  • CE

  • RoHS

  • REACH

  • GCF

  • WEEE

LiPo battery certifications

  • IEC 62368-1

  • UN38.3

  • 2006/66/EC

  • UL1642

  • IEC62133 -2

  • IEC 62321-4, IEC 62321-5

—

 

Working and Storage Conditions

5G SENS equipped with rechargeable LiPo battery

Minimum

Maximum

5G SENS equipped with rechargeable LiPo battery

Minimum

Maximum

Operating temperature

-10 °C

+55 °C

Storage temperature

-25 °C

+70 °C

Humidity Range

5 %

95 %

5G SENS equipped with ENERGIZER L91 batteries (external link)

Minimum

Maximum

5G SENS equipped with ENERGIZER L91 batteries (external link)

Minimum

Maximum

Operating temperature

-40 °C

+60 °C

Storage temperature

-40 °C

+60 °C

Humidity Range

5 %

95 %