Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 32 Current »

(cable USB C - MSTB)

General

The cable allows connections between devices and the GPIO inputs of the 5G SENS. The cable is equipped with a USB C connector, which connects to the 5G SENS. The other end of the cable connections to the GPIO contacts with an industrial connector.

This cable does not follow the USB C standard!

Specification

Plug A

Plug B

Type

USB-C 3.2 Gen 2, male

Phoenix Contact KGG-MSTB 2,5/5

Material

Nickel-Plate

Plastic

Color

black

green

Max. Current

100 mA

Max. Voltage

5 V

Weight

24g

Part Number

Length

6570-0000

15-25cm

AE710061

35-40cm

Compliances

General

Product Marketing Name

USB C - MSTB

Hardware Revision

22-008-1.0

Manufacturer

exelonix GmbH
Washingtonstraße 16/16a
01139 Dresden
Germany

The USB C - MSTB is not a medical device. That means the USB C - MSTB is not intended for a medical purpose, to be used directly on humans.

Markings

The figure below shows the labeling of the USB C - MSTB.

Label item

Description 

CE

CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area

QR code

The QR code contains the following information:

  • web address of manual

CE / RoHs / REACH

Hereby, exelonix GmbH declares that the USB C - MSTB is in compliance with directives 2011/65/EU. The full text of the EU declaration of conformity is available in the following document:

WEEE

Exelonix GmbH (WEEE Reg. No. DE46285380) fully endorses the environmental objectives of the WEEE. All electronic products must be collected and sent to approved operators for the safe disposal of electronic equipment.

The WEEE Directive (2012/19/EU) aims to reduce the amount of waste electrical and electronic equipment that ends up in landfills. Its primary purpose is the prevention of waste electrical and electronic equipment (WEEE) and requires the re-use, recycling and recovery of such waste, to reduce its disposal to landfill or incineration. All electrical and electronic waste must be stored, collected, treated, recycled and disposed of separately from other waste. Therefore, if you are intending to discard these at the end of their useful life, please contact your local re-seller for disposal. Local authorities will also provide information on the free disposal of electronic equipment.

  • No labels