Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

v1.8.0-GPIO-X-3.0.1

Release date: 26.10.2022

Fixes

  • Fixes an issue with the creation of Cumulocity/Cloud-of-Things SmartRest templates.
    Note: Although the issue exists in the previous version it has no impact on the overall functionality of v1.8.0-GPIO-X-3.0.0

v1.8.0-GPIO-X-3.0.0

Release date: 01.10.2022

Added / Changed

  • Add Firmware-Over-The-Air (FOTA) functionality for the Cumulocity/Cloud-of-Things platform

  • Add additional device information during the Cumulocity/Cloud-of-Things registration process

  • Add values of the acceleration sensor, humidity sensor and optical sensor to the measurement message

  • Automatically adapt to the german daylight saving time offset

  • Add support for multiple APNs of different mobile network operators

  • Add configuration option to send data to the Exelonix platform via SenML

  • Check for new firmware before restarting the device if the initialization process failed

Fixed

  • Only desired internal application parameters can be set remotely now

v1.7.0-GPIO-X-2.1.0

Release date: 01.07.2022

Initial release

  • No labels