Obecná informace

Popis

USB Connect 4G - EU je zařízení USB pro mobilní komunikaci a podporuje standard LTE CAT 4.

Zařízení je připojeno k hostitelskému zařízení pomocí rozhraní USB typu A, které napájí zařízení USB a vysílá/přijímá data.

Podporovaná pásma LTE

Working und Storage Conditions

Electrical Characteristics

Get started with USB Connect 4G - EU

Preparations & Power Up

1. Install the drivers for Windows/Linux operating system on your host device.→ https://www.telit.com/evkevb-drivers/

2. Plug in the USB Connect 4G into the USB Type A socket of the host device.

3. Make sure that the distance from your body to the USB Connect 4G is larger than 20 cm.

4. If the USB socket of the host device is active, the USB Connect 4G starts automatically.

5. Now you can identify the COM port of the USB Connect 4G - EU and send AT commands to unlock the AT command interface. For this, you need to send the following command (ask manufacturer for password):

   AT#SECIFAUTH=XXXXXXXXXX

Vypnout

1. Nejprve proveďte následující nastavení prostřednictvím rozhraní AT příkazu (např. prostřednictvím ovladače AT):

   AT#GPIO=10,1,1

2. Nyní příkaz

   AT#SHDN

   lze odeslat k vypnutí USB Connect 4G.

3. Po 15 sekundách můžete bezpečně odpojit USB Connect 4G od hostitelského zařízení.

Provozní

https://www.telit.com/m2m-iot-products/cellular-modules/standard-industrial-grade/xe910-family/#LE910Cx-downloads

Soulad

Všeobecné

Aby bylo zajištěno splnění směrnic pro vystavení vysokofrekvenčnímu záření, musí být zařízení používáno ve vzdálenosti minimálně 20 cm od těla. Nedodržení těchto pokynů může vést k tomu, že vaše vystavení vysokofrekvenčnímu záření překročí příslušné limity směrnic. Požadavky na umístění a příslušná omezení na umístění s minimální vzdáleností 20 cm od uživatele jsou jasně uvedeny u zařízení USB. Zařízení je výhradně pro průmyslové použití/aplikaci a je instalováno v průmyslovém prostředí. Toto zařízení není určeno pro vzdálený přístup přes LTE. To zahrnuje také aktualizace firmwaru a změny nastavení rádia přes LTE. Pokud je nutná aktualizace firmwaru, kontaktujte výrobce.

The USB device contains the LE910C4-EU module from Telit. The compliance information statements for this module can be found at https://www.telit.com/m2m-iot-products/cellular-modules/standard-industrial-grade/xe910-family/#LE910Cx-downloads

CE Certification

Hereby, exelonix GmbH declares that the radio equipment type USB Connect 4G - EU is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.exelonix.com/de/

WEEE

Exelonix GmbH fully endorses the environmental objectives of the WEEE. All electronic products must be collected and sent to approved operators for safe disposal of electronic equipment.

Safety Instructions

RF Exposure

When your device is in use, the system handling your connection controls the power level at which your device transmits.

Distraction

Driving

Full attention must be given to driving at all times in order to reduce the risk of an accident. Using this device while driving causes distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving.

Operating machinery

Full attention must be given to operating the machinery in order to reduce the risk of an accident.

Product Handling

You alone are responsible for how you use your device and any consequences of its use.

You must always switch off your device wherever the use of a mobile phone is prohibited. If your device has clip-on covers, do not use it without the covers attached and do not remove or change them while using the device. Use of your device is subject to safety measures designed to protect users and their environment.

• Always treat your device and its accessories with care and keep it in a clean and dust-free place.

• Do not expose your device or its accessories to open flames or lit tobacco products.

• Do not expose your device or its accessories to liquid, moisture or high humidity.

• Do not drop, throw or try to bend your device or its accessories.

• Do not paint your device or its accessories.

• Do not attempt to disassemble your device or its accessories: only authorised personnel must do so.

• Do not expose your device or its accessories to extreme temperatures, minimum -20 and maximum +55 degrees Celsius.

• Please check local regulations for disposal of electronic products.

Emergency Situations

This device, like any wireless device, operates using radio signals, which cannot guarantee connection in all conditions. Therefore, you must never rely solely on any wireless device for emergency communications.

Device Heating

Your device may become warm during normal use.

Electrical Safety

Accessories

Only use approved accessories. Do not connect with incompatible products or accessories.

Faulty and Damaged Products

Do not attempt to disassemble the device or its accessory. Only qualified personnel must service or repair the device or its accessory. If your device or its accessory has been submerged in water, punctured, or subjected to a severe fall, do not use it until you have taken it to be checked at an authorised service centre.

Interference

Care must be taken when using the device in close proximity to personal medical devices, such as pacemakers and hearing aids.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a device and a pacemaker to avoid potential interference with the pacemaker.

Hearing Aids

People with hearing aids or other cochlear implants may experience interfering noises when using wireless devices or when one is nearby.

The level of interference will depend on the type of hearing device and the distance from the interference source, increasing the separation between them may reduce the interference. You may also consult your hearing aid manufacturer to discuss alternatives.

Medical devices

Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.

Aircraft

Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft. If your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.

Explosive environments

Petrol stations and explosive atmospheres

In locations with potentially explosive atmospheres, obey all posted signs to turn off wireless devices such as your device or other radio equipment.

Areas with potentially explosive atmospheres include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders.

Blasting Caps and Areas

Turn off your device or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.

Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

(b) Maximální vysokofrekvenční výkon přenášený v frekvenčních pásmech, ve kterých rádiové zařízení pracuje: Maximální výkon pro všechna pásma je nižší než nejvyšší mezní hodnota stanovená v související harmonizované normě.

Kmitočtová pásma a vysílací výkon (vyzařovaný a/nebo vedený) nominální limity platné pro toto rádiové zařízení jsou následující:

1, 3, 7, 8, 20, 28A: 23 dBm.

Informace o softwaru

Verze softwaru produktu je 25.20.678