(Cable cable KGG-MSTB - open strandOpen)
General
The KGG-MSTB - Off cable is an extension of the USB C - MSTB cable and allows access to each GPIO. In this way the GPIO lines can be mounted in screw terminals. An industrial connector is used for the connection to the USB C - MSTB cable
Specification
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Plug A | Open Endings | |
Type | IC 2,5/ 5-ST-5,08 | Wire end sleeve |
Material | Plastic | - |
Color | green | numbered 1 to 4 |
Max. Current | 2 A |
Max. Voltage | 5 V |
Weight | 132g |
Compliances
General
Product Marketing Name | KGG-MSTB - Offen |
|---|---|
Hardware Revision | 22-009-1.0 |
Manufacturer | exelonix GmbH |
The KGG-MSTB - Offen is not a medical device. That means the KGG-MSTB - Offen is not intended for a medical purpose, to be used directly on humans.
Markings
The figure below shows the labeling of the KGG-MSTB - Offen.
...
Label item | Description |
|---|---|
CE | CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area |
QR code | The QR code contains the following information:
|
CE / RoHs / REACH
Hereby, exelonix GmbH declares KGG-MSTB - Offen is in compliance with directives 2011/65/EU. The full text of the EU declaration of conformity is available in the following document:
| View file | ||
|---|---|---|
|
WEEE
Exelonix GmbH (WEEE Reg. No. DE46285380) fully endorses the environmental objectives of the WEEE. All electronic products must be collected and sent to approved operators for the safe disposal of electronic equipment.
The WEEE Directive (2012/19/EU) aims to reduce the amount of waste electrical and electronic equipment that ends up in landfills. Its primary purpose is the prevention of waste electrical and electronic equipment (WEEE) and requires the re-use, recycling and recovery of such waste, to reduce its disposal to landfill or incineration. All electrical and electronic waste must be stored, collected, treated, recycled and disposed of separately from other waste. Therefore, if you are intending to discard these at the end of their useful life, please contact your local re-seller for disposal. Local authorities will also provide information on the free disposal of electronic equipment.