The following documentation describes how to configure the required applications
| Info |
|---|
Getestet auf Raspberry Pi4 mit Raspberry Pi OS (64-Bit und 32-Bit) von 04.07.2024 |
| Note |
|---|
Noch nicht getestet ob vor Konfiguration mit AT Commands notwendig |
…
Step 1: Read which USB port Linux has indicated on the flash drive.
| Code Block |
|---|
pi@raspberrypi:~ $ nmcli device show GENERAL.DEVICE: ttyUSB2 GENERAL.TYPE: gsm GENERAL.HWADDR: (unknown) GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) |
…
| Code Block |
|---|
sudo nmcli connection add type gsm ifname ttyUSB2 con-name mymodem apn vgesace.nb.iot
sudo nmcli connection up id mymodem
sudo reboot
|
Step 3Step 2: Set up your mobile network by changing the APN address and USB port name to your own.
| Code Block |
|---|
sudo nmcli connection add type gsm ifname ttyUSB2 con-name mymodem apn test.iot.de |
Step: 43: Connect to the mobile network
| Code Block |
|---|
sudo nmcli connection up id mymodem |
Step 54: Restart operating system
| Code Block |
|---|
sudo reboot |
Step 95: Wait of Attachfor connection