...

1. Select a single message to be sent to the device. The message string will be copied to message text field 5.
2. List view of transmitted and received window.
3. Button to empty list view 2.
4. Button to start sending of the message in 5 to the device.
5. Message text field. The message to be sent to the device can be edited further.
6. Button to enable AT mode in case the device is currently in EASY mode.

Change Endpoint

Devices send data to the Vodafone backend by default. If you want your devices to send data to another backend, you can change the destination IP address.
Switch to Control Center and select EASY+TX from the right list of commands and fill in IP and Port of the backend you want to send data to. Add the payload to the Data field and adjust the DataLength field.

The default IP address of Vodafone is 213.136.85.114 and the Port is 9876.

Image Added

NB-IoT Performance

The NB-IoT Performance tab compares the NB-IoT RAT (Radio Access Technology) with other common RATs like LTE Cat1, UMTS and GSM used for transmitting small amount of data.
To acces the NB-IoT Performance tab the device needs to be attached to the NB-Iot network first, othrewise the tab is disabled.

...