(cable KGG-MSTB - Open)
General
The KGG-MSTB - Open cable is an extension of the USB C - MSTB cable and allows access to each GPIO. In this way the GPIO lines can be mounted in screw terminals. An industrial connector is used for the connection to the USB C - MSTB cable
Specification
| Drawio | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Max. Current | 2 A |
Max. Voltage | 5 V |
Weight | 132g |
Compliances
General
Product Marketing Name | KGG-MSTB - Open |
|---|---|
Hardware Revision | 22-009-1.0 |
Manufacturer | exelonix GmbH |
The KGG-MSTB - Open is not a medical device. That means the KGG-MSTB - Open is not intended for a medical purpose, to be used directly on humans.
Markings
The figure below shows the labeling of the KGG-MSTB - Open.
...
Label item | Description |
|---|---|
CE | CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area |
QR code | The QR code contains the following information:
|
CE / RoHs / REACH
Hereby, exelonix GmbH declares KGG-MSTB - Open is in compliance with directives 2014/30/EU and 2015/863/EU.
WEEE
Exelonix GmbH (WEEE Reg. No. DE46285380) fully endorses the environmental objectives of the WEEE. All electronic products must be collected and sent to approved operators for the safe disposal of electronic equipment.
...