...
Install the drivers for Windows/Linux operating system on your host device→ https://www.telit.com/evkevb-drivers/
Plug the USB Connect 4G into the USB Type A socket of the host device.
Make sure that the distance from your body to the USB Connect 4G is greater than 20 cm.
If the USB socket of the host device is active, the USB Connect 4G starts automatically.
Now you can identify the COM port of the USB Connect 4G - XX EU and send AT commands to unlock the at command interface. Therefore you need to send (ask manufacturer for password):
Code Block AT#SECIFAUTH=XXXXXXXXXX
...