...
Detached
In the detached state, the device is not yet able to transmit data via to the NB-IoT network. First, an attach procedure needs to be triggered.
...
, including the following steps:
Select the NB-IoT network in the drop down menu.
Click on the Attach to network button to start the attachment procedure to the selected NB-IoT network.
Drop down menu to select the NB-IoT network to attach to.
Note: Be aware that the inserted SIM card must correspond to the selected network, otherwise the attach procedure will fail.
...
Parameter | Value | Acceptable range |
|---|---|---|
Cell ID 8199650.. | 8493413 | (228 − 1) i |
PCI | 212 | - |
EARFCN | 6374 | 0..65535 |
RSSI | -61 dBm | -113 dBm..-51dBm |
RSRP | -70 dBm | -140dBm..44dBm |
RSRQ | -10 dB | -3dB..-19.5 dB |
SNR | 21 dB | >= 25 dB |
ECL | 0 | 0..2 |
TX Time | 308 ms | |
RX Time | 59229 ms | |
RRC state | 0 | 0,1 |
Signal bars | 5 | 4..5 |
TX power | -11 dB | -40 dB..+23 dB |
TX Bytes | 235 bytes | |
RX Bytes | 238 bytes | |
TX Blocks | 11 | |
RX Blocks | 10 | |
RLC UL Rate | 1558 b/s | |
RLC DL Rate | 500 b/s | |
MAC UL Rate | 6800 b/s | |
MAC DL Rate | 5760 b/s |
...